MANUFACTURERS AND SUPPLIERS OF QUALITY MARINE EQUIPMENT

 
Wärtsilä Propeller Shaft Seal
 
    Enviroguard FSE and PSE Seal    
 
FEATURES

Available in split and non-split designs.

Robust construction.

Accepts misalignment and vibration.

Low magnetic signature.

High interface abrasion resistance.

Compact build length.

Accepts high speed shafts.

Factory test on all seals.

BENEFITS

Reliability.

Fit with shaft in situ (FSE).

Low installation cost.

Low through life costs.

Long service intervals.

Easy, quick installation.

Excellent price/quality ratio.

Fit and forget.

 

The Enviroguard FSE and PSE seals are a face type seal for high performance applications. Available in both fully split (FSE) and partially-split (PSE) designs with an elastomeric body and Silicon Carbide interfaces.
The FSE and PSE seals are particularly suitable for high speed vessels, offshore supply vessels and other high powered vessels such as tugs and trawlers.
The FSE and PSE seals will accept misalignment, vibration and large axial movements. For applications with open sterntubes the inboard seal an emergency seal for safety, survey and maintenance purposes. The Enviroguard FSE can be fitted and serviced without removing the shaft, thus reducing the installation time to a minimum. The Enviroguard PSE features split spares meaning the seal can be serviced without removing the shaft.
Worn shafts and lip seal liners, leaking glands (stuffing box), and continuous maintenance are a thing of the past. The simplicity of the design provides maximum sealing capability. Reliability and hence long service intervals are achieved by the design of the elastomeric body and the choice of interface materials.
Performance is achieved by statically mounting the elastomeric body. Maintenance is reduced due to high abrasion resistance, no galvanic corrosion of interfaces, absence of shaft liner in way of seal and low sensitivity to misalignment and vibration which together give low through life cost.
The Enviroguard FSE and PSE seals cover shaft diameters ranging from 70mm to 450mm and with a compact build length it suit most stern frame designs.

 
 
 
 
         
  Also available, CEA-Seal and Wartsila ManeBar Seal for oil lubricated sterntubes.

 
 
Also available from C.E.& A. Co.
Propeller Shaft and Rudder Bearings Propeller Shafts
Sterntubes and Rudder Trunks Rudder Carrier Bearings
Oil Lubricated Shaft Seals Deck Machinery
ManeCraft - small boat seal Chockfast Orange
Vickers Marine Oils Polyflex - Engine Mounts and Couplings
Spurs - Rope, Net and Weed Cutter Arctic Steel Water Strainers
  Home Page
CEA-Seal
For further information, or to purchase an Enviroguard Seal please contact us.
 
Wärtsilä ManeBar Seal
 
  5 Schenker Drive, Royal Park.
South Australia. 5014

Ph: 08 8240 0777
Fax 08: 8240 0777

Int. Ph: +618 8240 0777
Int. Fax: +618 8240 0711
E-mail: ceaco@ceaco.com.au